Utah Water Science Center

Groundwater

The USGS annually monitors groundwater levels in thousands of wells in the United States. Groundwater level data are collected as either discrete field-water-level measurements or as continuous time-series data by automated recorders. The Utah Water Science Center makes discrete water-level measurements at 100 wells annually, usually during the month of March. Continuous recorders are maintained at 5 wells throughout the state. All water-level data is stored in the USGS National Water Information System (NWIS), which is accessible from the internet by anyone. 

Utah Active Water Level Network

Filter Total Items: 4
Date published: August 14, 2019
Status: Active

Groundwater Conditions in Utah

Small amounts of groundwater can be obtained from wells throughout most of Utah, but large amounts that are of suitable chemical quality for irrigation, public supply, or industrial use generally can be obtained only in specific ares. Most wells in Utah yield water from unconsolidated basin-fill deposits, and most are in intermountain basins that have been partly filled with rock materials...

Contacts: Lincoln Smith
Date published: October 16, 2018
Status: Active

Groundwater Models

Groundwater is an important resource, but availability, quality, and sustainability during growth have become major concerns. Groundwater models are numerical representations that help hydrologists better understand groundwater systems. These models also provide tools for water managers. The Utah Water Science Center has groundwater models for many seperate areas in Utah as well as two...

Date published: July 28, 2018
Status: Active

Colorado Plateau Regional Groundwater Availability

Study goals

This project seeks to quantify the status of groundwater as an integrated resource with surface water in the arid and semiarid region of the Colorado Plateau principal aquifer system. Surface-water resources that originate in this region are over allocated and serve 35 million people, 4.5 million acres of farmland, and are used to generate 12 billion...

Date published: June 20, 2018
Status: Active

Managed Aquifer Recharge

Sand Hollow Reservoir in Washington County, Utah, was completed in March 2002 and is operated for both surface-water storage and managed aquifer recharge via infiltration from surface basin spreading to the underlying Navajo Sandstone. From 2002 through 2014, about 216,000 acre-feet were diverted from the Virgin River to Sand Hollow Reservoir, and about 127,000 acre-feet of water seeped...

Contacts: Thomas Marston