Data

This data release contains fiber-optic distributed temperature sensor (FO-DTS) data for three reaches of Mill Creek collected during two deployments between August 20, 2020, and September 4, 2020. Spatially continuous profiles of water temperature were collected with a Sensornet® Oryx DTS FO-DTS. At each of the three reaches, water temperature was spatially averaged over 1.015-meter...

This data release contains the complete set of modeling input and output files for a Heat Source water temperature model and fish bioenergetics model on the lower Quinault River in Washington state. A detailed description of the modeling process, results, and interpretation can be found in the associated primary publication.

This data release provides information on the chemistry and character of bed sediments accumulated in the 1.6-mile long impoundment behind Enloe Dam on the Similkameen River in Okanogan County, WA. Sediment samples were collected during four weeks in October – December 2019. The sampling locations were distributed among 10 transects that ranged from 0.1-0.2 miles apart along the length...

In June, 2022, the Mount Rainier Streamflow Permanence model was revised to replace monthly climatic covariates with seven-month summaries to address peer-review comments related to inclusion of correlated covariates into the model. Replacement of the monthly covariates resulted in changes to the model source code and model outputs, which are now annual probabilities of streamflow...

The rock type, or lithology, of river gravels provides information about the bedrock source area of that material, and can act as a tracer to help assess relative gravel contributions from tributaries or distinct valley deposits. Between July 2020 and August 2021, gravels at 29 sites in the Sauk, Suiattle and White Chuck rivers were collected and sorted into simple lithologic categories...

Accelerometer scour monitors were deployed on the Sauk River, Washington during Water Year 2018 as part of a study on the timing of streambed scour in salmon-spawning habitat. This data release contains data of the three-dimensional orientation recorded at 15-minute intervals for the accelerometer monitors. Each accelerometer scour monitor was comprised of one to two individual...

This data release provides suspended-sediment (concentration and load) and water temperature data for two locations along the Suiattle River (USGS 1217900 and 12188380) and a tributary, Downey Creek (USGS 1217985) in Washington State for partial periods over 2013-2017. Suspended-sediment and water temperature data were collected over two summer seasons from May through September 2016 and...

This data release is a repository for data presented in Anderson and Shean (2021), a publication looking at topographic change in proglacial and glacier-marginal areas on Mount Rainier between 1960 and 2017. Datasets include all newly derived digital elevation models, shapefiles defining various areas of analysis, and tabular summaries of data presented in figures. See individual child...

WaterWatch displays maps, graphs, and tables describing real-time, recent, and past streamflow conditions for the United States, including flood and droughts. Real-time information generally is updated on an hourly basis.

This release includes all data collected in support of a juvenile Chinook salmon exposure study designed to understand the retention of microplastic clothing fibers (hereon referred to as "microfibers") after feeding. To understand the potential impacts of microfiber ingestion to fish, we ran a feeding experiment with juvenile Chinook salmon to determine if ingested fibers are retained...

This data release includes hourly water temperature data at 12 locations in the main stem of the Quinault River and its major tributaries, and data from a riparian vegetation survey conducted in the lower Quinault River, Washington. Water temperature data was collected during the summer of 2018 and 2019 at most locations. Variable collection periods by site are described within the...

This data release provides source code and an R workspace with functions comprising a non-linear baseflow separation model, calibrated values of parameters and estimates of the baseflow component of daily streamflow at selected streamflow gages. Parameter values were determined by calibration of the model. Estimates of the baseflow component include daily values and the total baseflow as...