The purpose of this handbook is to provide a basic understanding and associated reference material for the Landsat 7 Observatory and its science data products.
Using the USGS Landsat Level-1 Data Product
Landsat Collections Level-1 data can be rescaled to Top of Atmosphere (TOA) reflectance and/or radiance using radiometric coefficients provided in the metadata file that is delivered in the Landsat 1-9 Level-1 product bundle.
Landsat Collections Level-1 data products consist of quantized and calibrated scaled Digital Numbers (DN) representing the multispectral image data. Landsat 8 and Landsat 9 data are delivered in 16-bit unsigned integer format. Landsat 1-7 products are delivered in 8-bit unsigned integer format. Landsat Level-1 data can be converted to TOA spectral radiance, reflective band DN’s can be converted to TOA reflectance, and thermal band data can be converted from spectral radiance to TOA brightness temperature by using the formulas listed below.
Conversion to TOA Radiance
Landsat Level-1 data can be converted to TOA spectral radiance using the radiance rescaling factors in the MTL file:
\(L_\lambda = M_L Q_{cal} + A_L\)
where:
Lλ = TOA spectral radiance (Watts/( m2 * srad * μm))
ML =Band-specific multiplicative rescaling factor from the metadata (RADIANCE_MULT_BAND_x, where x is the band number)
AL=Band-specific additive rescaling factor from the metadata (RADIANCE_ADD_BAND_x, where x is the band number)
Qcal = Quantized and calibrated standard product pixel values (DN)
Conversion to TOA Reflectance
Reflective band DN’s can be converted to TOA reflectance using the rescaling coefficients in the MTL file:
\({\rho _ \lambda} ^ \prime = M_\rho Q_{cal} + A_\rho\)
where:
ρλ' = TOA planetary reflectance, without correction for solar angle. Note that ρλ' does not contain a correction for the sun angle.
Mρ=Band-specific multiplicative rescaling factor from the metadata (REFLECTANCE_MULT_BAND_x, where x is the band number)
Aρ =Band-specific additive rescaling factor from the metadata (REFLECTANCE_ADD_BAND_x, where x is the band number)
Qcal = Quantized and calibrated standard product pixel values (DN)
TOA reflectance with a correction for the sun angle is then:
\( \rho _ \lambda = \frac{{\rho _ \lambda} ^ \prime}{\cos \big( \theta _ {SZ} \big)} = \frac{{\rho _ \lambda} ^ \prime}{\sin \big( \theta _ {SE} \big)} \)
where:
ρλ= TOA planetary reflectance
θSE = Local sun elevation angle. The scene center sun elevation angle in degrees is provided in the metadata (SUN_ELEVATION).
θSZ =Local solar zenith angle; θSZ = 90° - θSE
For more accurate reflectance calculations, per-pixel solar angles could be used instead of the scene center solar angle. While per-pixel solar zenith angles are not provided with the Landsat Level-1 products, tools are provided which allow users to create angle bands.
Conversion to Top of Atmosphere Brightness Temperature
Thermal band data can be converted from spectral radiance to top of atmosphere brightness temperature using the thermal constants in the MTL file:
\(T = \frac{K_2}{\ln \big( \frac{K_1}{{L _ \lambda} }+ 1 \big)}\)
where:
T = Top of atmosphere brightness temperature (K)where:
Lλ =TOA spectral radiance (Watts/( m2 * srad * μm))
K1 =Band-specific thermal conversion constant from the metadata (K1_CONSTANT_BAND_x, where x is the thermal band number)
K2 =Band-specific thermal conversion constant from the metadata (K2_CONSTANT_BAND_x, where x is the thermal band number)
The information displayed below is for historical reference only.
Solar exoatmospheric spectral irradiances (ESUN) for the Landsat 1-7 Pre-Collection Level-1 data
This information is not relevant to Landsat Collection 1 data so we do not recommend using the ESUN values with Collection 1 Level-1 data products. Landsat 1-7 Collections Level-1 products are cross-calibrated to L8 OLI and provide two sets of scaling factors, one to calculate the TOA reflectance and the other to calculate TOA radiance. The recommended ESUN values Pre-Collection Landsat 1-7 level-1 data are listed below. Although the data are consistently calibrated, calculated TOA reflectance over the same target may differ among the sensors due to the spectral bandpass difference. ESUN values are not required for Landsat 8 and Landsat 9 Level-1 data because the metadata file provides coefficients necessary to convert to radiance and reflectance from the quantized and calibrated DNs of the product. The values can be applied to all MSS sensors, due to cross-calibration of all the MSS sensors to match the Landsat 5 instrument.
ESUN values are derived from the ChKur spectrum, which is the combined Chance-Kurucz Solar Spectrum within MODTRAN 5.
Band Number | Landsat 7 ETM+ | Landsat 5 TM | Landsat 4 TM | Landsat 1-5 MSS |
1 | 1970 | 1958 | 1958 | 1848 |
2 | 1842 | 1827 | 1826 | 1588 |
3 | 1547 | 1551 | 1554 | 1235 |
4 | 1044 | 1036 | 1033 | 856.6 |
5 | 225.7 | 214.9 | 214.7 | - |
7 | 82.06 | 80.65 | 80.70 | - |
8 | 1369 | - | - | - |
Related Content
The purpose of this handbook is to provide a basic understanding and associated reference material for the Landsat 7 Observatory and its science data products.
The Landsat 9 Data Users Handbook provides an understanding and associated reference material for the Landsat 9 Observatory, the data acquired, and subsequent science products and processing systems.
Visit this Landsat Missions page to learn more about Landsat 9.
The Landsat 9 Data Users Handbook provides an understanding and associated reference material for the Landsat 9 Observatory, the data acquired, and subsequent science products and processing systems.
Visit this Landsat Missions page to learn more about Landsat 9.
The Landsat 8 Data Users Handbook provides a basic understanding and associated reference material for the Landsat 8 Observatory and associated science data products.
Visit Landsat Missions for more information on Landsat 8.
The Landsat 8 Data Users Handbook provides a basic understanding and associated reference material for the Landsat 8 Observatory and associated science data products.
Visit Landsat Missions for more information on Landsat 8.
Spectral Characteristics Viewer
The Spectral Characteristics Viewer allows users to determine which satellite bands are best suited for research applications.
Related Content
The purpose of this handbook is to provide a basic understanding and associated reference material for the Landsat 7 Observatory and its science data products.
The purpose of this handbook is to provide a basic understanding and associated reference material for the Landsat 7 Observatory and its science data products.
The Landsat 9 Data Users Handbook provides an understanding and associated reference material for the Landsat 9 Observatory, the data acquired, and subsequent science products and processing systems.
Visit this Landsat Missions page to learn more about Landsat 9.
The Landsat 9 Data Users Handbook provides an understanding and associated reference material for the Landsat 9 Observatory, the data acquired, and subsequent science products and processing systems.
Visit this Landsat Missions page to learn more about Landsat 9.
The Landsat 8 Data Users Handbook provides a basic understanding and associated reference material for the Landsat 8 Observatory and associated science data products.
Visit Landsat Missions for more information on Landsat 8.
The Landsat 8 Data Users Handbook provides a basic understanding and associated reference material for the Landsat 8 Observatory and associated science data products.
Visit Landsat Missions for more information on Landsat 8.
Spectral Characteristics Viewer
The Spectral Characteristics Viewer allows users to determine which satellite bands are best suited for research applications.