Publications
Filter Total Items: 7490
Empirical estimation of regional time variation in seismicity rates Empirical estimation of regional time variation in seismicity rates
No abstract available.
Authors
Karen R. Felzer
Compilation of surface creep on California faults and comparison of WGCEP 2007 deformation model to Pacific-North American plate Mmtion Compilation of surface creep on California faults and comparison of WGCEP 2007 deformation model to Pacific-North American plate Mmtion
This Appendix contains 3 sections that 1) documents published observations of surface creep on California faults, 2) constructs line integrals across the WG-07 deformation model to compare to the Pacific - North America plate motion, and 3) constructs strain tensors of volumes across the WG-07 deformation model to compare to the Pacific - North America plate motion. Observation of creep...
Authors
Beth A. Wisely, David A. Schmidt, Ray J. Weldon
Paleoseismic Investigations of the Walnut Site on the San Jacinto Fault Paleoseismic Investigations of the Walnut Site on the San Jacinto Fault
The Walnut paleoseismic site is located along the northern San Jacinto fault about 3 km southeast of the San Bernardino, California city center (Figures 1, 2). More than 340 meters of trenches were excavated across the fault zone at this site as part of an Alquist-Priolo fault study (Figure 3). We photographed and logged the SE wall and most of the NE wall of trench 1, both walls of...
Authors
T. E. Fumal, K.J. Kendrick
Conditional, time-dependent probabilities for segmented Type-A faults in the WGCEP UCERF 2 Conditional, time-dependent probabilities for segmented Type-A faults in the WGCEP UCERF 2
This appendix presents elastic-rebound-theory (ERT) motivated time-dependent probabilities, conditioned on the date of last earthquake, for the segmented type-A fault models of the 2007 Working Group on California Earthquake Probabilities (WGCEP). These probabilities are included as one option in the WGCEP?s Uniform California Earthquake Rupture Forecast 2 (UCERF 2), with the other...
Authors
Edward H. Field, Vipin Gupta
A-priori rupture models for Northern California Type-A faults A-priori rupture models for Northern California Type-A faults
This appendix describes how a-priori rupture models were developed for the northern California Type-A faults. As described in the main body of this report, and in Appendix G, “a-priori” models represent an initial estimate of the rate of single and multi-segment surface ruptures on each fault. Whether or not a given model is moment balanced (i.e., satisfies section slip-rate data)...
Authors
Chris J. Wills, Ray J. Weldon, Edward H. Field
Monte Carlo method for determining earthquake recurrence parameters from short paleoseismic catalogs: Example calculations for California Monte Carlo method for determining earthquake recurrence parameters from short paleoseismic catalogs: Example calculations for California
Paleoearthquake observations often lack enough events at a given site to directly define a probability density function (PDF) for earthquake recurrence. Sites with fewer than 10-15 intervals do not provide enough information to reliably determine the shape of the PDF using standard maximum-likelihood techniques [e.g., Ellsworth et al., 1999]. In this paper I present a method that...
Authors
Tom Parsons
Earthquake Rate Model 2 of the 2007 working group for California earthquake probabilities, magnitude-area relationships Earthquake Rate Model 2 of the 2007 working group for California earthquake probabilities, magnitude-area relationships
The Working Group for California Earthquake Probabilities must transform fault lengths and their slip rates into earthquake moment-magnitudes. First, the down-dip coseismic fault dimension, W, must be inferred. We have chosen the Nazareth and Hauksson (2004) method, which uses the depth above which 99% of the background seismicity occurs to assign W. The product of the observed or...
Authors
Ross S. Stein
Recurrence interval and event age data for Type A faults Recurrence interval and event age data for Type A faults
This appendix summarizes available recurrence interval, event age, and timing of most recent event data for Type A faults considered in the Earthquake Rate Model 2 (ERM 2) and used in the ERM 2 Appendix C analysis as well as Appendix N (time-dependent probabilities). These data have been compiled into an Excel workbook named Appendix B A-fault event ages_recurrence_V5.0 (herein referred...
Authors
Timothy E. Dawson, Ray J. Weldon, Glenn P. Biasi
Overview of the Southern San Andreas Fault Model Overview of the Southern San Andreas Fault Model
This appendix summarizes the data and methodology used to generate the source model for the southern San Andreas fault. It is organized into three sections, 1) a section by section review of the geological data in the format of past Working Groups, 2) an overview of the rupture model, and 3) a manuscript by Biasi and Weldon (in review Bulletin of the Seismological Society of America)...
Authors
Ray J. Weldon, Glenn P. Biasi, Chris J. Wills, Timothy E. Dawson
California fault parameters for the National Seismic Hazard Maps and Working Group on California Earthquake Probabilities 2007 California fault parameters for the National Seismic Hazard Maps and Working Group on California Earthquake Probabilities 2007
This report describes development of fault parameters for the 2007 update of the National Seismic Hazard Maps and the Working Group on California Earthquake Probabilities (WGCEP, 2007). These reference parameters are contained within a database intended to be a source of values for use by scientists interested in producing either seismic hazard or deformation models to better understand...
Authors
Chris J. Wills, Ray J. Weldon, W. A. Bryant
Summary of geologic data and development of A Priori Rupture Models for the Elsinore, San Jacinto, and Garlock faults Summary of geologic data and development of A Priori Rupture Models for the Elsinore, San Jacinto, and Garlock faults
This appendix to the WGCEP Earthquake Rate Model 2 summarizes geologic data and documents the development of the rupture models for the Elsinore, San Jacinto, and Garlock faults. For the summary of available geologic data, the documentation is organized by fault and fault segment and includes a summary of slip rates, event timing and recurrence, slip-per-event, and historical seismicity...
Authors
Timothy E. Dawson, Tom K. Rockwell, Ray J. Weldon, Chris J. Wills
Development of final a-fault rupture models for WGCEP/ NSHMP Earthquake Rate Model 2 Development of final a-fault rupture models for WGCEP/ NSHMP Earthquake Rate Model 2
This appendix discusses how we compute the magnitude and rate of earthquake ruptures for the seven Type-A faults (Elsinore, Garlock, San Jacinto, S. San Andreas, N. San Andreas, Hayward-Rodgers Creek, and Calaveras) in the WGCEP/NSHMP Earthquake Rate Model 2 (referred to as ERM 2. hereafter). By definition, Type-A faults are those that have relatively abundant paleoseismic information (e...
Authors
Edward H. Field, Ray J. Weldon, Thomas Parsons, Chris J. Wills, Timothy E. Dawson, Ross S. Stein, Mark D. Petersen