Publications

The scale of biogeochemical reactions was studied in a physically and chemically heterogeneous surficial Coastal Plain aquifer contaminated by a gasoline spill. The physical heterogeneity of the aquifer is manifested in two hydrologic units, a shallow local aquifer of perched water and a regional sandy aquifer. Over the studied vertical interval of 21.3 ft (6.5 m), concentrations of...

Water samples collected from rivers in the Mississippi River Basin were analyzed for selected herbicides to evaluate their discharge to the Gulf of Mexico and to identify their predominant source areas within the basin. Samples were collected from the Mississippi River at Baton Rouge, LA from 1991 to 1997 and from sites on the upper Mississippi, the Missouri, and the Ohio Rivers from...

Recently, methods have been developed to analyze NO3- for δ15N and δ18O, improving our ability to identify NO3- sources and transformations. However, none of the existing methods are suited for waters with low NO3- concentrations (0.7-10 µM). We describe an improved method for collecting and recovering NO3- on exchange columns. To overcome the lengthy collection loading times imposed by...

Enzymatic and histopathologic alterations of the digestive gland, gill, gonad, and kidney were studied in Asian clam (Potamocorbula amurensis) in April, 1997 from each of four United States Geological Survey (USGS) stations in the San Francisco Estuary. Stations were selected based on differing body burdens of metallic contaminants in clams (Stn 4.1>6.1>8.1>12.5) observed over 7 years...

An analytical method useful for the quantification of a range of pesticides and pesticide degradation products associated with suspended sediments was developed by testing a variety of extraction and cleanup schemes. The final extraction and cleanup methods chosen for use are suitable for the quantification of the listed pesticides using gas chromatography-ion trap mass spectrometry and...

A new method for direct determination of dissolved Fe(III) in acid mine water has been developed. In most present methods, Fe(III) is determined by computing the difference between total dissolved Fe and dissolved Fe(II). For acid mine waters, frequently Fe(II) ≫ Fe(III); thus, accuracy and precision are considerably improved by determining Fe(III) concentration directly. The new method...

Robowell is an automated process for monitoring selected ground water quality properties and constituents by pumping a well or multilevel sampler. Robowell was developed and tested to provide a cost-effective monitoring system that meets protocols expected for manual sampling. The process uses commercially available electronics, instrumentation, and hardware, so it can be configured to...

Oxyanions of arsenic and selenium can be used in microbial anaerobic respiration as terminal electron acceptors. The detection of arsenate and selenate respiring bacteria in numerous pristine and contaminated environments and their rapid appearance in enrichment culture suggest that they are widespread and metabolically active in nature. Although the bacterial species that have been...

Metal-mining related wastes in the Boulder River basin study area in northern Jefferson County, Montana, have been evaluated for their environmental effects as a part of the U.S. Geological Survey Abandoned Mine Lands Project. Many mine and prospect waste dumps, and mill wastes are located in the drainage basins of Basin Creek, Cataract Creek, and High Ore Creek, the three major...

Polarities of the soiL/sediment organic matter (SOM) in 19 soil and 9 freshwater sediment sam pies were determined from solid-state 13C-CP/MAS NMR spectra and compared with published partition coefficients (K(oc)) of carbon tetrachloride (CT) from aqueous solution. Nondestructive analysis of whole samples by solid-state NMR permits a direct assessment of the polarity of SOM that is not...

No abstract available.

The chemical composition of the Cu-mining-related acidic ground water (pH ∼ 3.5 to near neutral) in Pinal Creek Basin, Arizona has been monitored since 1980. In-situ experiments are planned using alluvial sediments placed in the ground-water flow path to measure changes in mineral and chemical composition and changes in dissolution rates of subsurface alluvial sediments. The test results...