Groundwater Quality

Science Center Objects

Even though the ground is an excellent mechanism for filtering out particulate matter, such as leaves, soil, and bugs, dissolved chemicals and gases can still occur in large enough concentrations in groundwater to cause problems.

•  Water Science School HOME  •  Groundwater topics  •  Water Quality topics  •

Groundwater Quality

Child about to get water from a groundwater well.

Groundwater usually looks crystal clear, but before drinking it, care must be taken to make sure it doesn't contain dissolved chemicals that could be harmful.
Credit: Howard Perlman, USGS, Public domain

Just because you have a well that yields plenty of water doesn't mean you can go ahead and just take a drink. Because water is such an excellent solvent it can contain lots of dissolved chemicals. And since groundwater moves through rocks and subsurface soil, it has a lot of opportunity to dissolve substances as it moves. For that reason, groundwater will often have more dissolved substances than surface water will.

Even though the ground is an excellent mechanism for filtering out particulate matter, such as leaves, soil, and bugs, dissolved chemicals and gases can still occur in large enough concentrations in groundwater to cause problems. Underground water can get contaminated from industrial, domestic, and agricultural chemicals from the surface. This includes chemicals such as pesticides and herbicides that many homeowners apply to their lawns.

Contamination of groundwater by road salt is of major concern in northern areas of the United States. Salt is spread on roads to melt ice, and, with salt being so soluble in water, excess sodium and chloride is easily transported into the subsurface groundwater. The most common water-quality problem in rural water supplies is bacterial contamination from septic tanks, which are often used in rural areas that don't have a sewage-treatment system. Effluent (overflow and leakage) from a septic tank can percolate (seep) down to the water table and maybe into a homeowner's own well. Just as with urban water supplies, chlorination may be necessary to kill the dangerous bacteria.

 

 

Diagram showing groundwater contamination from a waste disposal site.

The U.S. Geological Survey (USGS) is involved in monitoring the Nation's groundwater supplies. A national network of observation wells exists to measure regularly the water levels in wells and to investigate water quality.

 

Contaminants can be natural or human-induced

View a long list of chemicals and contaminants that can be found in groundwater.

Naturally occurring contaminants are present in the rocks and sediments. As groundwater flows through sediments, metals such as iron and manganese are dissolved and may later be found in high concentrations in the water. Industrial discharges, urban activities, agriculture, groundwater pumpage, and disposal of waste all can affect groundwater quality. Contaminants from leaking fuel tanks or fuel or toxic chemical spills may enter the groundwater and contaminate the aquifer. Pesticides and fertilizers applied to lawns and crops can accumulate and migrate to the water table.

Map of the U.S. showing areas of high risk for nitrogen contamination of groundwater.

One USGS model, based on nationwide data, was developed to estimate the risk of nitrate contamination to shallow ground water across the United States. The model integrates nitrogen inputs and aquifer vulnerability by use of Geographic Information System (GIS) technology. Nitrogen inputs include commercial fertilizer and manure application rates, atmospheric contributions, and population densities (the latter representing residential and urban nitrogen sources, such as septic systems, fertilizers, and domestic animal waste). Aquifer vulnerability is represented by soil-drainage characteristics—the ease with which water and chemicals can seep to ground water—and the extent to which woodlands are interspersed with cropland.
Credit: USGS, Public domain

Groundwater can contain hydrogen sulfide or other naturally occurring chemicals. Groundwater also may contain petroleum, organic compounds, or other chemicals introduced by humans' activities. Contaminated groundwater can occur if the well is located near land that is used for farming where certain kinds of chemicals are applied to crops, or near a gas station that has a leaking storage tank. Leakage from septic tanks and/or waste-disposal sites also can contaminate groundwater. A septic tank can introduce bacteria to the water, and pesticides and fertilizers that seep into farmed soil can eventually end up in water drawn from a well. Or, a well might have been placed in land that was once used for something like a garbage or chemical dump site. In any case, it is wise to have your well water tested for contaminates.

The physical properties of an aquifer, such as thickness, rock or sediment type, and location, play a large part in determining whether contaminants from the land surface will reach the groundwater. The risk of contamination is greater for unconfined (water-table) aquifers than for confined aquifers because they usually are nearer to land surface and lack an overlying confining layer to impede the movement of contaminants. Because groundwater moves slowly in the subsurface and many contaminants sorb to the sediments, restoration of a contaminated aquifer is difficult and may require years, decades, centuries, or even millennia.

 

Many Americans drink groundwater from their own wells

If you drive on a rural highway almost anywhere in the Nation you might see some small "doghouse-looking" enclosures or some metal pipes and tubing in the side yard of many homes and trailer parks. These are small wells that supply domestic water to individual and small groups of families.

If you ask them if the possible contamination of groundwater is of interest to them, they would have to say "yes". This is the case with tens of millions of people across the country. The map below shows the percentage of each State's population that relies on their own well water for home use. Percentages range from 1 percent in Puerto Rico to 44 percent in Maine, with the National average being 14 percent. You can view this and other maps and the corresponding data from the USGS publication "Estimated Use of Water in the United States, 2015".

Map of U.S., by state, showing percentage of state's population using self-supplied water

Significant percentages of each state's population supply their own home water via wells.

 

Some information on this page is from Ground Water and the Rural Homeowner, Pamphlet, U.S. Geological Survey, 1982, by Roger M. Waller