The team studies pathways of contaminants that might originate from the lifecycle of energy resources
image source - Vern Whitten Photography
The Energy Lifecycle Integrated Science Team focuses on the potential for contaminant exposures in the environment that might originate from energy resource activities including, extraction, production, transportation, storage, extraction, waste management and restoration. Perceived health risks to humans and other organisms will be distinguished from actual risks, if any. If actual risks are identified this project will inform how to economically and effectively minimize risk by providing scientific data and understandings about the environmental transport, fate, and exposure pathways of contaminants. Emphasis will be placed on addressing these issues on public and Department of Interior managed lands.
The United States is one of the largest users of energy, consuming annually about one-quarter of the energy resources produced in the world. The energy industry and government regulators work to provide energy resources to the public safely and effectively. Management of energy byproducts such as waste materials (including both solid and liquid wastes) from oil and gas development are a critical part of that work. However, spills, leaks, and other factors can create pathways for contaminants to enter the environment and result in exposures to humans and biota.
The associated health effects of specific spills have not been demonstrated in many cases, yet the perception of risk can drive action by industry and regulators. Hydrologists, chemists, biologists, and geologists on the Team conduct studies outside the mission of other federal agencies, by assessing actual versus perceived health effects to humans and biota due to exposures to energy production materials in the environment. This effort utilizes a watershed-and aquifer-based interdisciplinary science approach, providing a "big picture" that helps show where energy development activities are causing adverse health impacts on biota due to environmental contaminant exposures, as well as where they are not causing impacts. With this information in hand industry, land managers and other decision makers are able to balance the critical need for energy with further action, if any, to minimize health risks associated with energy production materials in the environment.
The USGS Energy Lifecycle Integrated Science Team (IST), a part of the Environmental Health Program, conducts research on potential contaminant exposures in the environment that might originate from the life cycle of energy resources. Their research is completed in laboratories, at targeted field sites, and in watersheds across the Nation to collectively deliver science on exposures and risks to wildlife, humans, ecosystems, and water resources. Potential contaminant releases are associated with transportation, storage, extraction, and management of energy-related products and wastes.
The team provides science to support balanced utilization and protection of our Nation’s resources. The Team is combining their findings on sources, fate, transport, and degradation of the contaminants with an understanding of the exposure and effects on wildlife and humans for a One-Health approach that recognizes the inextricable connections between the physical and living environment.
The Energy IST is unique in that they bring together geochemists, microbiologists, ecologists, toxicologists, geophysicists, hydrologists, and modelers along with remote sensing capabilities with more than 60 scientists from 16science centers across USGS. This breadth of research abilities allows the Team to address complex nationwide questions related to the lifecycle of energy resources that would be out of reach for individual and small groups of scientists The value of their research is enhanced by the active participation of stakeholders.
The Team Aims to:
- Identify Sources of Contaminants from Energy-Related Materials
- Identify Potential Pathways of Contaminants to/in the Environment
- Determine Toxicity and Risks to Organisms from Energy-Associated Materials in the Environment
- Evaluate Environmental Responses and Recovery from Energy Lifecycle Activities
- Evaluate Reuse Potential of Unconventional Oil and Gas (UOG) Wastes
Current Science Questions and Activities
- Materials from oil and gas (OG) extraction may contain toxic or radioactive elements from the geologic formation, additives such as biocides used during OG development, and products of natural degradation. What is the composition of the materials generated, the potential pathways to the environment, the mode-of-action and the effects, if any, on receptor organisms from exposure to these constituents?
- Energy development occurs nationwide on public and private lands at scales ranging from town to regional to state-level development. This work is focused on the regional, and especially watershed or aquifer scale, energy-resource associated releases (for example spills, pipeline breaks) to the environment. Are there contaminant exposures and actual, not perceived, public health concerns throughout the watershed or underlying aquifers downstream or downgradient of the release?
- Releases of energy-associated materials to the environment can occur at various time scales thereby altering biogeochemistry and potential health effects on fish and wildlife as well as contaminant exposures to humans. Is persistence related to actual health effects?
Selected Science Feature Article Listed Below.
See the publications tab for a complete list of publications
Pipeline Crude Oil Spill Still a Cleanup Challenge after 30 Years
Disinfection Byproducts from Treatment of Produced Waters
Below are data or web applications associated with this project.
Data on barium, strontium, cobalt, and nickel plumes formed during microbial iron-reduction on sediments and in water from a crude-oil-contaminated aquifer, Bemidji, Minnesota (2009-2019)
Microbial Community Composition Data from Blacktail Creek near Williston, North Dakota
Geochemistry data collected (1985-2015) for understanding the evolution of groundwater-contaminant plume chemistry emanating from legacy contaminant sources, an example from a long-term crude oil spill near Bemidji, Minnesota
Geochemistry Data for Wastewater Samples Collected at a Separator Tank and from an On-Site Storage Tank at the Marcellus Shale Energy and Environment Laboratory (MSEEL) 2015-2019, Morgantown Industrial Park (MIP), West Virginia (ver. 2.0, May 2023)
Data on the Effects of Oil and Gas Wastewater Components on Microbial Community Structure and Function
Geochemistry Data from Samples Collected in 2015-2017 to study an OG wastewater spill in Blacktail Creek, North Dakota
Data Sets from the National Crude Oil Spill Fate and Natural Attenuation Research Site near Bemidji, Minnesota, USA (ver. 3.0, March 2020)
Chemical and biological data from acute and chronic exposure to sodium nitrate and sodium sulfate for several freshwater organisms in water-only bioassays
Sediment composition data from northern Pennsylvania
Organic Analysis of Oilfield Wastewater from the Williston Basin, North Dakota
Sampling site information, well construction details, and data dictionaries for data sets associated with the National Crude Oil Spill Fate and Natural Attenuation Site near Bemidji, Minnesota
Water quality data from the Goose Lake Study Site Eastern Montana 1989-2018
Below are publications associated with this project.
Chloride toxicity to native freshwater species in natural and reconstituted prairie pothole waters
Oil and gas wastewater components alter streambed microbial community structure and function
The sensitivity of a unionid mussel (Lampsilis siliquoidea) to a permitted effluent and elevated potassium in the effluent
Arsenic in petroleum-contaminated groundwater near Bemidji, Minnesota is predicted to persist for centuries
We used a reactive transport model to investigate the cycling of geogenic arsenic (As) in a petroleum-contaminated aquifer. We simulated As mobilization and sequestration using surface complexation reactions with Fe(OH)3 during petroleum biodegradation coupled with Fe-reduction. Model results predict that dissolved As in the plume will exceed the U.S. and EU 10 µg/L drinking water standard for ~40
Methanogens and their syntrophic partners dominate zones of enhanced magnetic susceptibility at a petroleum contaminated site
Arsenic release to the environment from hydrocarbon production, storage, transportation, use and waste management
Observations on long-term memory in honey bees
No abstract available.
Effects of a crude-oil recovery remediation system operated 1999–2003 on groundwater plumes and unsaturated-zone vapor concentrations at a crude-oil spill site near Bemidji, Minnesota
A crude-oil spill occurred in 1979 when a pipeline burst near Bemidji, Minnesota. More than 70 percent of the 1.7 million liters of spilled crude oil was removed shortly thereafter. In response to a requirement by the State regulatory agency to remove the remaining crude to a sheen in all wells, in 1998, the pipeline company installed a dual-pump recovery system at the site. This additional remedi
Geochemical and geophysical indicators of oil and gas wastewater can trace potential exposure pathways following releases to surface waters
Hydrocarbons to carboxyl-rich alicyclic molecules: A continuum model to describe biodegradation of petroleum-derived dissolved organic matter in contaminated groundwater plumes
Endocrine disrupting activities and geochemistry of water resources associated with unconventional oil and gas activity
Biological effects of hydrocarbon degradation intermediates: Is the total petroleum hydrocarbon analytical method adequate for risk assessment?
The Energy Lifecycle Integrated Science Team focuses on the potential for contaminant exposures in the environment that might originate from energy resource activities including, extraction, production, transportation, storage, extraction, waste management and restoration. Perceived health risks to humans and other organisms will be distinguished from actual risks, if any. If actual risks are identified this project will inform how to economically and effectively minimize risk by providing scientific data and understandings about the environmental transport, fate, and exposure pathways of contaminants. Emphasis will be placed on addressing these issues on public and Department of Interior managed lands.
The United States is one of the largest users of energy, consuming annually about one-quarter of the energy resources produced in the world. The energy industry and government regulators work to provide energy resources to the public safely and effectively. Management of energy byproducts such as waste materials (including both solid and liquid wastes) from oil and gas development are a critical part of that work. However, spills, leaks, and other factors can create pathways for contaminants to enter the environment and result in exposures to humans and biota.
The associated health effects of specific spills have not been demonstrated in many cases, yet the perception of risk can drive action by industry and regulators. Hydrologists, chemists, biologists, and geologists on the Team conduct studies outside the mission of other federal agencies, by assessing actual versus perceived health effects to humans and biota due to exposures to energy production materials in the environment. This effort utilizes a watershed-and aquifer-based interdisciplinary science approach, providing a "big picture" that helps show where energy development activities are causing adverse health impacts on biota due to environmental contaminant exposures, as well as where they are not causing impacts. With this information in hand industry, land managers and other decision makers are able to balance the critical need for energy with further action, if any, to minimize health risks associated with energy production materials in the environment.
The USGS Energy Lifecycle Integrated Science Team (IST), a part of the Environmental Health Program, conducts research on potential contaminant exposures in the environment that might originate from the life cycle of energy resources. Their research is completed in laboratories, at targeted field sites, and in watersheds across the Nation to collectively deliver science on exposures and risks to wildlife, humans, ecosystems, and water resources. Potential contaminant releases are associated with transportation, storage, extraction, and management of energy-related products and wastes.
The team provides science to support balanced utilization and protection of our Nation’s resources. The Team is combining their findings on sources, fate, transport, and degradation of the contaminants with an understanding of the exposure and effects on wildlife and humans for a One-Health approach that recognizes the inextricable connections between the physical and living environment.
The Energy IST is unique in that they bring together geochemists, microbiologists, ecologists, toxicologists, geophysicists, hydrologists, and modelers along with remote sensing capabilities with more than 60 scientists from 16science centers across USGS. This breadth of research abilities allows the Team to address complex nationwide questions related to the lifecycle of energy resources that would be out of reach for individual and small groups of scientists The value of their research is enhanced by the active participation of stakeholders.
The Team Aims to:
- Identify Sources of Contaminants from Energy-Related Materials
- Identify Potential Pathways of Contaminants to/in the Environment
- Determine Toxicity and Risks to Organisms from Energy-Associated Materials in the Environment
- Evaluate Environmental Responses and Recovery from Energy Lifecycle Activities
- Evaluate Reuse Potential of Unconventional Oil and Gas (UOG) Wastes
Current Science Questions and Activities
- Materials from oil and gas (OG) extraction may contain toxic or radioactive elements from the geologic formation, additives such as biocides used during OG development, and products of natural degradation. What is the composition of the materials generated, the potential pathways to the environment, the mode-of-action and the effects, if any, on receptor organisms from exposure to these constituents?
- Energy development occurs nationwide on public and private lands at scales ranging from town to regional to state-level development. This work is focused on the regional, and especially watershed or aquifer scale, energy-resource associated releases (for example spills, pipeline breaks) to the environment. Are there contaminant exposures and actual, not perceived, public health concerns throughout the watershed or underlying aquifers downstream or downgradient of the release?
- Releases of energy-associated materials to the environment can occur at various time scales thereby altering biogeochemistry and potential health effects on fish and wildlife as well as contaminant exposures to humans. Is persistence related to actual health effects?
Selected Science Feature Article Listed Below.
See the publications tab for a complete list of publications
Pipeline Crude Oil Spill Still a Cleanup Challenge after 30 Years
Disinfection Byproducts from Treatment of Produced Waters
Below are data or web applications associated with this project.
Data on barium, strontium, cobalt, and nickel plumes formed during microbial iron-reduction on sediments and in water from a crude-oil-contaminated aquifer, Bemidji, Minnesota (2009-2019)
Microbial Community Composition Data from Blacktail Creek near Williston, North Dakota
Geochemistry data collected (1985-2015) for understanding the evolution of groundwater-contaminant plume chemistry emanating from legacy contaminant sources, an example from a long-term crude oil spill near Bemidji, Minnesota
Geochemistry Data for Wastewater Samples Collected at a Separator Tank and from an On-Site Storage Tank at the Marcellus Shale Energy and Environment Laboratory (MSEEL) 2015-2019, Morgantown Industrial Park (MIP), West Virginia (ver. 2.0, May 2023)
Data on the Effects of Oil and Gas Wastewater Components on Microbial Community Structure and Function
Geochemistry Data from Samples Collected in 2015-2017 to study an OG wastewater spill in Blacktail Creek, North Dakota
Data Sets from the National Crude Oil Spill Fate and Natural Attenuation Research Site near Bemidji, Minnesota, USA (ver. 3.0, March 2020)
Chemical and biological data from acute and chronic exposure to sodium nitrate and sodium sulfate for several freshwater organisms in water-only bioassays
Sediment composition data from northern Pennsylvania
Organic Analysis of Oilfield Wastewater from the Williston Basin, North Dakota
Sampling site information, well construction details, and data dictionaries for data sets associated with the National Crude Oil Spill Fate and Natural Attenuation Site near Bemidji, Minnesota
Water quality data from the Goose Lake Study Site Eastern Montana 1989-2018
Below are publications associated with this project.
Chloride toxicity to native freshwater species in natural and reconstituted prairie pothole waters
Oil and gas wastewater components alter streambed microbial community structure and function
The sensitivity of a unionid mussel (Lampsilis siliquoidea) to a permitted effluent and elevated potassium in the effluent
Arsenic in petroleum-contaminated groundwater near Bemidji, Minnesota is predicted to persist for centuries
We used a reactive transport model to investigate the cycling of geogenic arsenic (As) in a petroleum-contaminated aquifer. We simulated As mobilization and sequestration using surface complexation reactions with Fe(OH)3 during petroleum biodegradation coupled with Fe-reduction. Model results predict that dissolved As in the plume will exceed the U.S. and EU 10 µg/L drinking water standard for ~40
Methanogens and their syntrophic partners dominate zones of enhanced magnetic susceptibility at a petroleum contaminated site
Arsenic release to the environment from hydrocarbon production, storage, transportation, use and waste management
Observations on long-term memory in honey bees
No abstract available.
Effects of a crude-oil recovery remediation system operated 1999–2003 on groundwater plumes and unsaturated-zone vapor concentrations at a crude-oil spill site near Bemidji, Minnesota
A crude-oil spill occurred in 1979 when a pipeline burst near Bemidji, Minnesota. More than 70 percent of the 1.7 million liters of spilled crude oil was removed shortly thereafter. In response to a requirement by the State regulatory agency to remove the remaining crude to a sheen in all wells, in 1998, the pipeline company installed a dual-pump recovery system at the site. This additional remedi