Timothy D Straub (Former Employee)

Acoustic instrumentation can be used to provide time-series and discrete estimates of suspended-sediment concentration, load, and sediment particle sizes in fluvial systems, which are essential for creating informed solutions to many sediment-related environmental, engineering, and land management concerns. Historically, scientists have developed relations between suspended sediment

The Federal Interagency Sedimentation Project (FISP) standardizes and advances sediment science among federal agencies. It is important to ensure that the FISP bag samplers perform isokinetically under all tested and approved conditions and collect samples that are representative of the stream or river cross-section. A measure of a sampler’s isokinetic behavior is its intake efficiency...

Sequoia Scientific’s LISST-ABS is a submersible acoustic instrument that measures the acoustic backscatter sensor (ABS) concentration at a point within a river, stream, or creek. Compared to traditional physical methods for measuring suspended-sediment concentration (SSC), sediment surrogates like the LISST-ABS offer continuous data that can be calibrated with physical SSC samples. Data...

Digital flood-inundation maps for about an 8-mile reach of the Little Calumet River, Illinois, were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation...

The use of side-looking acoustic Doppler velocity meters (ADVMs) to estimate fluvial suspended-sediment concentrations (SSC) has become more operational by the U.S. Geological Survey in recent years; however, direct transfer of these techniques to down-looking acoustic Doppler current profilers (ADCPs) currently is not widely feasible. Key assumptions in the sidelooking ADVM method...

Acoustics and other surrogates can be used to accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for creating informed solutions to many sediment-related environmental, engineering, and agricultural concerns. Interagency efforts in recent years have advanced the testing, methods development, operational...

The Federal Interagency Sedimentation Project (FISP) is an example of effective interagency cooperation a cross-cutting science issue. The FISP was created in 1939 to research and standardize fluvial sediment science methods and instruments. That mission remains relevant today as research continues on emerging tools and technologies for measurement and analysis of sediment properties.

The USGS Water Mission Area’s Sediment Science Program provides leadership, training, and methods development in fluvial sediment science for the USGS and its external partners. Overarching objectives of the USGS Sediment Science Program (which includes the Federal Interagency Sedimentation Project) include: 1) developing and promoting innovative sediment monitoring techniques that...

Results of a flood-hazard analysis conducted by the U.S. Geological Survey, in cooperation with the Argonne National Laboratory, for four headwater streams within the Argonne National Laboratory property indicate that the 1-percent and 0.2-percent annual exceedance probability floods would cause multiple roads to be overtopped. Results indicate that most of the effects on the...

Acoustic technologies have the potential to be used as a surrogate for measuring suspended-sediment concentration (SSC). This potential was examined in a fine-grained (97-100 percent fines) riverine system in central Illinois by way of installation of an acoustic instrument. Acoustic data were collected continuously over the span of 5.5 years. Acoustic parameters were regressed against...

Suspended-sediment characteristics can be computed using acoustic indices derived from acoustic Doppler velocity meter (ADVM) backscatter data. The sediment acoustic index method applied in these types of studies can be used to more accurately and cost-effectively provide time-series estimates of suspended-sediment concentration and load, which is essential for informed solutions to many...

The use of acoustic and other parameters as surrogates for suspended-sediment concentrations (SSC) in rivers has been successful in multiple applications across the Nation. Tools to process and evaluate the data are critical to advancing the operational use of surrogates along with the subsequent development of regression models from which real-time sediment concentrations can be made...