Skip to main content
U.S. flag

An official website of the United States government

Publications

Filter Total Items: 7519

Report for borehole explosion data acquired in the 1999 Los Angeles Region Seismic Experiment (LARSE II), Southern California: Part I, description of the survey Report for borehole explosion data acquired in the 1999 Los Angeles Region Seismic Experiment (LARSE II), Southern California: Part I, description of the survey

The Los Angeles Region Seismic Experiment (LARSE) is a joint project of the U.S. Geological Survey (USGS) and the Southern California Earthquake Center (SCEC). The purpose of this project is to produce seismic images of the subsurface of the Los Angeles region down to the depths at which earthquakes occur, and deeper, in order to remedy a deficit in our knowledge of the deep structure of...
Authors
Gary S. Fuis, Janice M. Murphy, David A. Okaya, Robert W. Clayton, Paul M. Davis, Kristina Thygesen, Shirley A. Baher, Trond Ryberg, Mark L. Benthien, Gerry Simila, J. Taylor Perron, Alan K. Yong, Luke Reusser, William J. Lutter, Galen Kaip, Michael D. Fort, Isa Asudeh, Russell Sell, John R. Van Schaack, Edward E. Criley, Ronald Kaderabek, Will M. Kohler, Nickolas H. Magnuski

Energy-to-moment ratios for damaging intraslab earthquakes: preliminary results on a few case studies Energy-to-moment ratios for damaging intraslab earthquakes: preliminary results on a few case studies

We use the energy-to-moment ratio, as introduced by Newman and Okal [1998] to examine the source characteristics of normal-faulting intraslab earthquakes, compared to nearby interplate thrust events, based on recent case studies in central Chile and southeastern Mexico. In Chile, we find that the 1997 intraslab event had an exceptionally large E/M0 ratio, 30 times greater than the nearby
Authors
Emile A. Okal, S. H. Kirby

The roughness of natural terrain: A planetary and remote sensing perspective The roughness of natural terrain: A planetary and remote sensing perspective

We examine the various methods and parameters in common use for quantifying and reporting surface topographic "roughness." It is shown that scale-dependent roughness parameters are almost always required, though not widely used. We suggest a method of standardizing the parameters that are computed and reported so that topographic data gathered by different workers using different field...
Authors
Michael K. Shepard, Bruce A. Campbell, Mark H. Bulmer, Lisa R. Gaddis, Tom G. Farr, Jeffrey J. Plaut

Louisiana coastal wetlands: a resource at risk Louisiana coastal wetlands: a resource at risk

Approximately half the Nation's original wetland habitats have been lost over the past 200 years. In part, this has been a result of natural evolutionary processes, but human activities, such as dredging wetlands for canals or draining and filling for agriculture, grazing, or development, share a large part of the responsibility for marsh habitat alteration and destruction. Louisiana's...
Authors
S. Jeffress Williams

Urban seismic experiments investigate Seattle fault and basin Urban seismic experiments investigate Seattle fault and basin

In the past decade, Earth scientists have recognized the seismic hazards that crustal faults and sedimentary basins pose to Seattle, Washington (Figure 1). In 1998, the US. Geological Survey and its collaborators initiated a series of urban seismic studies of the upper crust to better map seismogenic structures and sedimentary basins in the Puget Lowland. These studies are called the...
Authors
Thomas M. Brocher, Thomas L. Pratt, Ken C. Creager, Robert S. Crosson, William P. Steele, Craig S. Weaver, Arthur D. Frankel, Anne Trohu, Catherine M. Snelson, Kate C. Miller, Steven H. Harder, Uri S. ten Brink

Holocene relative sea level changes along the Seattle Fault at Restoration Point, Washington Holocene relative sea level changes along the Seattle Fault at Restoration Point, Washington

At a marsh on the hanging wall of the Seattle fault, fossil brackish water diatom and plant seed assemblages show that the marsh lay near sea level between ∼7500 and 1000 cal yr B.P. This marsh is uniquely situated for recording environmental changes associated with past earthquakes on the Seattle fault. Since 7500 cal yr B.P., changes in fossil diatoms and seeds record several rapid...
Authors
Brian L. Sherrod, Robert C. Bucknam, Estella B. Leopold

Helping coastal communities at risk from tsunamis: the role of U.S. Geological Survey research Helping coastal communities at risk from tsunamis: the role of U.S. Geological Survey research

In 1946, 1960, and 1964, major tsunamis (giant sea waves usually caused by earthquakes or submarine landslides) struck coastal areas of the Pacific Ocean. In the U.S. alone, these tsunamis killed hundreds of people and caused many tens of millions of dollars in damage. Recent events in Papua New Guinea (1998) and elsewhere are reminders that a catastrophic tsunami could strike U.S...
Authors
Eric L. Geist, Guy R. Gelfenbaum, Bruce E. Jaffe, Jane A. Reid

Seismic instrumentation of buildings Seismic instrumentation of buildings

The purpose of this report is to provide information on how and why we deploy seismic instruments in and around building structures. The recorded response data from buildings and other instrumented structures can be and are being primarily used to facilitate necessary studies to improve building codes and therefore reduce losses of life and property during damaging earthquakes. Other...
Authors
Mehmet Çelebi

Program to convert SUDS2ASC files to a single binary SEGY file Program to convert SUDS2ASC files to a single binary SEGY file

This program, SUDS2SEGY, converts and combines ASCII files created using SUDS2ASC Version 2.60, to a single SEGY file. SUDS2ASC has been used previously to create an ASCII file of three-component seismic data for an individual recording station. However, many seismic processing packages have difficulty reading in ASCII data. In addition, it may be cumbersome to process a separate file...
Authors
Mark Goldman

Relationships among sea-floor structure and benthic communities in Long Island Sound at regional and benthoscape scales Relationships among sea-floor structure and benthic communities in Long Island Sound at regional and benthoscape scales

Long Island Sound is comprised of a rich and spatially heterogeneous mix of sea-floor environments which provide habitat for an equally diverse set of assemblages of soft-sediment communities. Information from recent research on the geomorphological and chemical attributes of these environments, as well as from studies of the hydrodynamics of the Sound, provide the opportunity to develop...
Authors
Roman N. Zajac, Ralph S. Lewis, Larry J. Poppe, David C. Twichell, Joseph Vozarik, Mary L. DiGiacomo-Cohen

Mercury in Long Island Sound sediments Mercury in Long Island Sound sediments

Mercury (Hg) concentrations were measured in 394 surface and core samples from Long Island Sound (LIS). The surface sediment Hg concentration data show a wide spread, ranging from 600 ppb Hg in westernmost LIS. Part of the observed range is related to variations in the bottom sedimentary environments, with higher Hg concentrations in the muddy depositional areas of central and western...
Authors
J.C. Varekamp, Marilyn R. Buchholtz ten Brink, E.I. Mecray, B. Kreulen
Was this page helpful?