This 3D model of Pu‘u ‘Ō‘ō's crater was created from thermal images during an overflight of the cone. The deepest portion of the crater is about 320 meters (1050 feet) below the crater floor that existed prior to April 30.
What is a digital elevation model (DEM)?
A Digital Elevation Model (DEM) is a representation of the bare ground (bare earth) topographic surface of the Earth excluding trees, buildings, and any other surface objects.
DEMs are created from a variety of sources. USGS DEMs used to be derived primarily from topographic maps. Those are being systematically replaced with DEMs derived from high-resolution lidar and IfSAR (Alaska only) data.
Learn more:
Related Content
What is the difference between lidar data and a digital elevation model (DEM)?
Light detection and ranging (lidar ) data are collected from aircraft using sensors that detect the reflections of a pulsed laser beam. The reflections are recorded as millions of individual points, collectively called a “point cloud,” that represent the 3D positions of objects on the surface including buildings, vegetation, and the ground. Digital elevation models ( DEMs ) are one of many...
What data sources are used to produce the 3D Elevation Program (3DEP) DEMs?
The USGS 3D Elevation Program (3DEP) is in the process of collecting high-quality lidar and IfSAR (for Alaska) coverage for all of the United States and its territories. As this new data becomes available, legacy Digital Elevation Models (DEMs) are being systematically replaced with high-resolution DEMs produced almost entirely from the lidar and ifsar data. Legacy DEMs were produced from...
What is the vertical accuracy of the 3D Elevation Program (3DEP) DEMs?
As of 2022, the absolute vertical accuracy of the 3D Elevation Program (3DEP) 1/3 arc-second seamless DEM product within the conterminous United States is approximately 0.82 meters root mean square error (RMSE), based on a comparison to almost 25,000 NOAA National Geodetic Survey OPUS points . Accuracy has improved from a RMSE of 1.55 meters tested in 2013, due to the addition of lidar projects...
Where can I find 3D Elevation Program (3DEP) product updates and status maps?
3D Elevation Program (3DEP) product updates and status maps are available at these sites: Updates The National Map Data Delivery News Subscribe to Simple Notification Services to receive emails regarding changes to the status of The National Map Services Status Maps The National Map Download Client – Click “Show” below each elevation product LidarExplorer – Lidar point cloud only DEM Availability...
3D model of Pu‘u ‘Ō‘ō's crater
This 3D model of Pu‘u ‘Ō‘ō's crater was created from thermal images during an overflight of the cone. The deepest portion of the crater is about 320 meters (1050 feet) below the crater floor that existed prior to April 30.
Digital Elevation Model Created by an Unmanned Aerial System
This digital elevation model was created using structure from motion software mounted to an Unmanned Aerial System (UAS) to analyze bridge scour. Studies using UAS have included stream temperature analyses, bird and mammal surveys, coastal change mapping, sandbar habitat surveys, fluvial erosion rates, microclimate mapping, air quality analysis, plant stress as
This digital elevation model was created using structure from motion software mounted to an Unmanned Aerial System (UAS) to analyze bridge scour. Studies using UAS have included stream temperature analyses, bird and mammal surveys, coastal change mapping, sandbar habitat surveys, fluvial erosion rates, microclimate mapping, air quality analysis, plant stress as
Majuro Atoll — Topobathymetric Model
This video is of is a three-dimensional (3D) view of the Majuro Atoll, Republic of the Marshall Islands topobathymetric model which consists of topography (land elevation) and bathymetry (water depth). This video shows the importance of high-resolution, detailed topobathymetric models because the highest natural elevation for the Majuro Atoll is only three meters.
This video is of is a three-dimensional (3D) view of the Majuro Atoll, Republic of the Marshall Islands topobathymetric model which consists of topography (land elevation) and bathymetry (water depth). This video shows the importance of high-resolution, detailed topobathymetric models because the highest natural elevation for the Majuro Atoll is only three meters.
Elevation
The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS National 3D Elevation Program (3DEP). The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories.
The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS National 3D Elevation Program (3DEP). The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories.
PubTalk 11/2010 — Silicon, Software, and Science
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
Related Content
- FAQ
What is the difference between lidar data and a digital elevation model (DEM)?
Light detection and ranging (lidar ) data are collected from aircraft using sensors that detect the reflections of a pulsed laser beam. The reflections are recorded as millions of individual points, collectively called a “point cloud,” that represent the 3D positions of objects on the surface including buildings, vegetation, and the ground. Digital elevation models ( DEMs ) are one of many...
What data sources are used to produce the 3D Elevation Program (3DEP) DEMs?
The USGS 3D Elevation Program (3DEP) is in the process of collecting high-quality lidar and IfSAR (for Alaska) coverage for all of the United States and its territories. As this new data becomes available, legacy Digital Elevation Models (DEMs) are being systematically replaced with high-resolution DEMs produced almost entirely from the lidar and ifsar data. Legacy DEMs were produced from...
What is the vertical accuracy of the 3D Elevation Program (3DEP) DEMs?
As of 2022, the absolute vertical accuracy of the 3D Elevation Program (3DEP) 1/3 arc-second seamless DEM product within the conterminous United States is approximately 0.82 meters root mean square error (RMSE), based on a comparison to almost 25,000 NOAA National Geodetic Survey OPUS points . Accuracy has improved from a RMSE of 1.55 meters tested in 2013, due to the addition of lidar projects...
Where can I find 3D Elevation Program (3DEP) product updates and status maps?
3D Elevation Program (3DEP) product updates and status maps are available at these sites: Updates The National Map Data Delivery News Subscribe to Simple Notification Services to receive emails regarding changes to the status of The National Map Services Status Maps The National Map Download Client – Click “Show” below each elevation product LidarExplorer – Lidar point cloud only DEM Availability...
- Multimedia
3D model of Pu‘u ‘Ō‘ō's crater
This 3D model of Pu‘u ‘Ō‘ō's crater was created from thermal images during an overflight of the cone. The deepest portion of the crater is about 320 meters (1050 feet) below the crater floor that existed prior to April 30.
This 3D model of Pu‘u ‘Ō‘ō's crater was created from thermal images during an overflight of the cone. The deepest portion of the crater is about 320 meters (1050 feet) below the crater floor that existed prior to April 30.
Digital Elevation Model Created by an Unmanned Aerial SystemThis digital elevation model was created using structure from motion software mounted to an Unmanned Aerial System (UAS) to analyze bridge scour. Studies using UAS have included stream temperature analyses, bird and mammal surveys, coastal change mapping, sandbar habitat surveys, fluvial erosion rates, microclimate mapping, air quality analysis, plant stress as
This digital elevation model was created using structure from motion software mounted to an Unmanned Aerial System (UAS) to analyze bridge scour. Studies using UAS have included stream temperature analyses, bird and mammal surveys, coastal change mapping, sandbar habitat surveys, fluvial erosion rates, microclimate mapping, air quality analysis, plant stress as
Majuro Atoll — Topobathymetric ModelThis video is of is a three-dimensional (3D) view of the Majuro Atoll, Republic of the Marshall Islands topobathymetric model which consists of topography (land elevation) and bathymetry (water depth). This video shows the importance of high-resolution, detailed topobathymetric models because the highest natural elevation for the Majuro Atoll is only three meters.
This video is of is a three-dimensional (3D) view of the Majuro Atoll, Republic of the Marshall Islands topobathymetric model which consists of topography (land elevation) and bathymetry (water depth). This video shows the importance of high-resolution, detailed topobathymetric models because the highest natural elevation for the Majuro Atoll is only three meters.
ElevationThe National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS National 3D Elevation Program (3DEP). The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories.
The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS National 3D Elevation Program (3DEP). The NED provides seamless raster elevation data of the conterminous United States, Alaska, Hawaii, and the island territories.
PubTalk 11/2010 — Silicon, Software, and ScienceMonitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
- Publications
- News