Data
Browse real-time data, data releases and more.
All Data
All Data
Filter Total Items: 17125
Modeling accumulated surface runoff and water availability for aquifer storage and recovery in the MENA region from 1984-2015 Modeling accumulated surface runoff and water availability for aquifer storage and recovery in the MENA region from 1984-2015
The Middle East and North Africa (MENA) region is the most water-scarce region with only two percent of the global average annual rainfall, hence underground aquifers are the major source of water. The need to improve water productivity and increase aquifer storage and recovery (ASR) is driving the efforts for this acceleration of aquifer storage and recovery project. The objective was...
MODFLOW 6 model of two hypothetical stream-aquifer systems to demonstrate the utility of the new Mover Package available only with MODFLOW 6 MODFLOW 6 model of two hypothetical stream-aquifer systems to demonstrate the utility of the new Mover Package available only with MODFLOW 6
Two MODFLOW 6 (version 6.2.1) models of hypothetical stream-aquifer systems are presented for the demonstration and utility of the Water Mover (MVR) Package available only with MODFLOW 6. Using a generalized approach, MVR facilitates the transfer of water among many arbitrary combinations of simulated features (i.e., pumping wells, stream, drains, lakes, etc.) within a MODFLOW 6...
MODFLOW simulator used to assess groundwater flow for the Whiting Field Naval Air Station, Milton FL MODFLOW simulator used to assess groundwater flow for the Whiting Field Naval Air Station, Milton FL
The study of Whiting Field Naval Air Station, Milton Florida requires numerical modeling of the groundwater system to determine the fate of contaminants released at the air station in previous decades. The MODFLOW-NWT modeling code (Niswonger and others, 2011) was applied for this purpose with field data defining a number of inputs including aquifer properties and timeseries. Lithologic...
MODFLOW, MT3D-USGS and VS2DH simulations used to estimate groundwater and nutrient inflow to Upper Klamath Lake, Oregon MODFLOW, MT3D-USGS and VS2DH simulations used to estimate groundwater and nutrient inflow to Upper Klamath Lake, Oregon
One-dimensional vertical models of GW flow (MODFLOW-2005) and solute transport (MT3D-USGS) were calibrated (UCODE) to 2014 observed dissolved silica (Si, 0.2-micron filtered) porewater concentrations in the upper 0.1 m of lakebed sediment to estimate GW flow and Si exchange across the lakebed interface. The Si-based calibrated GW flow rates were then used in conjunction with observed...
MODFLOW-2000 and MODPATH4 used to simulate groundwater flow and contaminant transport in the Pohatcong Valley, Warren County, New Jersey MODFLOW-2000 and MODPATH4 used to simulate groundwater flow and contaminant transport in the Pohatcong Valley, Warren County, New Jersey
The U. S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, developed a numerical groundwater flow model, using MODFLOW2000, to simulate groundwater flow in the Pohatcong Valley including the area within the Pohatcong Valley Ground Water Contamination Site. In 1978, the chlorinated solvents trichloroethene (TCE) and tetrachloroethene (PCE) were detected in...
MODFLOW-2005 and PEST models used to simulate the 2016 carbonate-rock aquifer test and characterize hydraulic properties of carbonate-rock and basin-fill aquifers near Long Canyon, Goshute Valley, northeastern Nevada MODFLOW-2005 and PEST models used to simulate the 2016 carbonate-rock aquifer test and characterize hydraulic properties of carbonate-rock and basin-fill aquifers near Long Canyon, Goshute Valley, northeastern Nevada
A three-dimension groundwater-flow model (MODFLOW-2005) was developed to improve understanding of groundwater flow and pumping effects near the Long Canyon Mine in Goshute Valley, northeastern Nevada. Bulk hydraulic properties of carbonate rocks and basin-fill aquifers were characterized by simultaneously interpreting steady-state flow during predevelopment conditions and changes in...
MODFLOW-2005 and SWI2 models for assessing groundwater availability in the volcanic aquifers of Kauai, Oahu, and Maui, Hawaii MODFLOW-2005 and SWI2 models for assessing groundwater availability in the volcanic aquifers of Kauai, Oahu, and Maui, Hawaii
Steady-state numerical groundwater-flow models were constructed for the islands of Kaua'i, O'ahu, and Maui, Hawai'i. Separate models were created for each island using MODFLOW-2005 (Harbaugh, 2005) with the Seawater Intrusion (SWI2) package (Bakker and others, 2013), which allows simulation of freshwater and saltwater in ocean-island aquifers. The purpose of the models is to enable...
MODFLOW-2005 model used to simulate water-table response to climate-change-driven sea-level rise and changes in recharge, Gateway National Recreation Area, Sandy Hook Unit, New Jersey MODFLOW-2005 model used to simulate water-table response to climate-change-driven sea-level rise and changes in recharge, Gateway National Recreation Area, Sandy Hook Unit, New Jersey
A MODFLOW-2005 model, using the SWI2 package, was developed for the Sandy Hook Unit, Gateway National Recreation Area (hereafter Sandy Hook) in New Jersey to evaluate the response of groundwater resources to expected sea-level rise (SLR) and changes in groundwater recharge associated with global climate change. The National Park Service (NPS), among other agencies, is mandated to...
MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathlines analysis, and solute transport in the crystalline-rock aquifer in the vicinity of the Savage Municipal Water-Supply Well Superfund Site, Milford, New Hampshire MODFLOW-2005, MODPATH, and MOC3D used for groundwater flow simulation, pathlines analysis, and solute transport in the crystalline-rock aquifer in the vicinity of the Savage Municipal Water-Supply Well Superfund Site, Milford, New Hampshire
The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the New Hampshire Department of Environmental Services, developed a model for used with MODFLOW-2005 and MODPATH5 to evaluate groundwater flow and advective transport under pre- and post-remediation conditions in the crystalline-rock aquifer in the vicinity of the Savage Municipal Water-Supply...
MODFLOW-LGR2 groundwater-flow model used to delineate transient areas contributing recharge and zones of contribution to selected wells in the upper Santa Fe Group Aquifer, southeastern Albuquerque, New Mexico MODFLOW-LGR2 groundwater-flow model used to delineate transient areas contributing recharge and zones of contribution to selected wells in the upper Santa Fe Group Aquifer, southeastern Albuquerque, New Mexico
A three-dimensional groundwater-flow model of a 73.2 square mile area in southeastern Albuquerque, New Mexico was designed and coupled to a regional (parent) model of the Middle Rio Grande Basin with the local-grid refinement numerical code MODFLOW-LGR2. This fine-gridded local (child) model was designed to simulate the response of the aquifer to pumping stresses and simulate advective...
MODFLOW-NWT and MODPATH6 model use to analyze remedial scenarios affecting plume movement through a sole-source aquifer system, southeastern Nassau County, New York MODFLOW-NWT and MODPATH6 model use to analyze remedial scenarios affecting plume movement through a sole-source aquifer system, southeastern Nassau County, New York
A three-dimensional steady-state groundwater flow model is coupled with the particle-tracking program, MODPATH, to assess the fate and transport of volatile organic compound plumes within the Magothy and upper glacial aquifers in southeastern Nassau County, NY. Knowledge of groundwater-flow patterns and rates is essential for effective management of groundwater resources and for...
MODFLOW-NWT and MODPATH6 Used to Delineate Areas Contributing Groundwater and Travel Times to Receiving Waters in Kings, Queens, Nassau, and Suffolk Counties, New York MODFLOW-NWT and MODPATH6 Used to Delineate Areas Contributing Groundwater and Travel Times to Receiving Waters in Kings, Queens, Nassau, and Suffolk Counties, New York
A previously developed three-dimensional steady-state groundwater flow model (https://doi.org/10.3133/sir20205091) is used to assist resource managers and planners in developing informed strategies to address nitrogen loading to coastal water bodies of Long Island, New York. Coastal water bodies of Long Island are important economic and recreational resources for the region. Therefore...