Skip to main content
U.S. flag

An official website of the United States government

Reports

Browse more than 82,000 reports authored by our scientists over the past 100+ year history of the USGS and refine search by topic, location, year, and advanced search.

Filter Total Items: 85088

Correlation between basalt flows and radiochemical and chemical constituents in selected wells in the southwestern part of the Idaho National Laboratory, Idaho Correlation between basalt flows and radiochemical and chemical constituents in selected wells in the southwestern part of the Idaho National Laboratory, Idaho

Wastewater discharged to wells and ponds and wastes buried in shallow pits and trenches at facilities at the Idaho National Laboratory (INL) have contributed contaminants to the eastern Snake River Plain (ESRP) aquifer in the southwestern part of the INL. This report describes the correlation between subsurface stratigraphy in the southwestern part of the INL with information on the...
Authors
Roy C. Bartholomay, Mary K. V. Hodges, Duane E. Champion

Runoff and water-quality characteristics of three Discovery Farms in North Dakota, 2008–16 Runoff and water-quality characteristics of three Discovery Farms in North Dakota, 2008–16

Agricultural producers in North Dakota are aware of concerns about degrading water quality, and many of the producers are interested in implementing conservation practices to reduce the export of nutrients from their farms. Producers often implement conservation practices without knowledge of the water quality of the runoff from their farm or if conservation practices they may implement...
Authors
Joel M. Galloway, Rochelle A. Nustad

An open repository of earthquake-triggered ground-failure inventories An open repository of earthquake-triggered ground-failure inventories

Earthquake-triggered ground failure, such as landsliding and liquefaction, can contribute significantly to losses, but our current ability to accurately include them in earthquake-hazard analyses is limited. The development of robust and widely applicable models requires access to numerous inventories of ground failures triggered by earthquakes that span a broad range of terrains...
Authors
Robert G. Schmitt, Hakan Tanyas, M. Anna Nowicki Jessee, Jing Zhu, Katherine M. Biegel, Kate E. Allstadt, Randall W. Jibson, Eric M. Thompson, Cees J. van Westen, Hiroshi P. Sato, David J. Wald, Jonathan W. Godt, Tolga Gorum, Chong Xu, Ellen Rathje, Keith L. Knudsen

P- and S-wave velocity models incorporating the Cascadia subduction zone for 3D earthquake ground motion simulations, Version 1.6—Update for Open-File Report 2007–1348 P- and S-wave velocity models incorporating the Cascadia subduction zone for 3D earthquake ground motion simulations, Version 1.6—Update for Open-File Report 2007–1348

In support of earthquake hazard studies and ground motion simulations in the Pacific Northwest, three-dimensional P- and S-wave velocity (VP and VS, respectively) models incorporating the Cascadia subduction zone were previously developed for the region encompassed from about 40.2°N. to 50°N. latitude, and from about 122°W. to 129°W. longitude. This report describes updates to the...
Authors
William J. Stephenson, Nadine G. Reitman, Stephen J. Angster

Assessment of undiscovered resources in calcrete uranium deposits, Southern High Plains region of Texas, New Mexico, and Oklahoma, 2017 Assessment of undiscovered resources in calcrete uranium deposits, Southern High Plains region of Texas, New Mexico, and Oklahoma, 2017

The U.S. Geological Survey estimates a mean of 40 million pounds of in-place uranium oxide (U3O8) remaining as potential undiscovered resources in the Southern High Plains region of Texas, New Mexico, and Oklahoma. This estimate used a geology-based assessment method specific to calcrete uranium deposits.
Authors
Susan M. Hall, Mark J. Mihalasky, Bradley S. Van Gosen

Alaska and Yukon magnetic compilation, residual total magnetic field Alaska and Yukon magnetic compilation, residual total magnetic field

This map is a compilation of aeromagnetic surveys over Yukon and eastern Alaska. Aeromagnetic surveys measure the total intensity of the earth's magnetic field. The field was measured by a magnetometer aboard an aircraft flown in parallel lines spaced at 200 m to 10000 m across the map area. The magnetic field reflects magnetic properties of bedrock and provides qualitative and...
Authors
W. Miles, Richard W. Saltus, Nathan Hayward, D. Oneschuk

Visualization of groundwater withdrawals Visualization of groundwater withdrawals

Generating an informative display of groundwater withdrawals can sometimes be difficult because the symbols for closely spaced wells can overlap. An alternative method for displaying groundwater withdrawals is to generate a “footprint” of the withdrawals. WellFootprint version 1.0 implements the Footprint algorithm with two optional variations that can speed up the footprint calculation...
Authors
Richard B. Winston, Daniel J. Goode

Antimony Antimony

Antimony is an important mineral commodity used widely in modern industrialized societies. The element imparts strength, hardness, and corrosion resistance to alloys that are used in many areas of industry, including in lead-acid storage batteries. Antimony’s leading use is as a fire retardant in safety equipment and in household goods, such as mattresses. The U.S. Government has...
Authors
Robert R. Seal, Klaus J. Schulz, John H. DeYoung,, David M. Sutphin, Lawrence J. Drew, James F. Carlin, Byron R. Berger

Barite (Barium) Barite (Barium)

Barite (barium sulfate, BaSO4) is vital to the oil and gas industry because it is a key constituent of the mud used to drill oil and gas wells. Elemental barium is an additive in optical glass, ceramic glazes, and other products. Within the United States, barite is produced mainly from mines in Nevada. Imports in 2011 (the latest year for which complete data were available) accounted for...
Authors
Craig A. Johnson, Nadine M. Piatak, M. Michael Miller

Beryllium Beryllium

Beryllium is a mineral commodity that is used in a variety of industries to make products that are essential for the smooth functioning of a modern society. Two minerals, bertrandite (which is supplied domestically) and beryl (which is currently supplied solely by imports), are necessary to ensure a stable supply of high-purity beryllium metal, alloys, and metal-matrix composites and...
Authors
Nora K. Foley, Brian W. Jaskula, Nadine M. Piatak, Ruth F. Schulte

Cobalt Cobalt

Cobalt is a silvery gray metal that has diverse uses based on certain key properties, including ferromagnetism, hardness and wear-resistance when alloyed with other metals, low thermal and electrical conductivity, high melting point, multiple valences, and production of intense blue colors when combined with silica. Cobalt is used mostly in cathodes in rechargeable batteries and in...
Authors
John F. Slack, Bryn E. Kimball, Kim B. Shedd
Was this page helpful?