How can I find the depth to the water table in a specific location?
The depth to the water table can change (rise or fall) depending on the time of year. During the late winter and spring when accumulated snow starts to melt and spring rainfall is plentiful, water on the surface infiltrates into the ground and the water table rises. When water-loving plants start to grow again in the spring and precipitation gives way to hot, dry summers, the water table falls because of evapotranspiration.
The most reliable method of obtaining the depth to the water table at any given time is to measure the water level in a shallow well with a tape. If no wells are available, surface geophysical methods can sometimes be used, depending on surface accessibility for placing electric or acoustic probes.
Databases containing depth-to water measurements can also be helpful, though they don't always have current data:
- The USGS National Water Information System (NWIS) has depth-to-water measurements made in the present and the past. A convenient way to find data for your area is by using the NWIS Mapper and selecting "Groundwater Sites" in the menu on the left. Click on any red groundwater pin to access the data.
- The National Groundwater Montoring Network is a compilation of groundwater monitoring wells from federal, state, and local groundwater networks across the nation. Use their Data Portal to zoom in to your area of interest and click on any site.
- Your state government probably maintains a database of drillers' logs that have water-levels recorded when a well was drilled, and hydrologic consultants often have reports that contain water-level data from shallow boreholes.
Consulting any or all of these sources is a good first step in finding out the depth to the water table.
Learn more:
Related Content
Where can I get my well water tested?
What is the difference between a confined and an unconfined (water-table) aquifer?
What is the Ground Water Atlas of the United States?
Where can I find detailed sampling methods for surface water and groundwater?
If the ground filters water, is groundwater always clean?
How important is groundwater?
Alaska Earthquake Rattles Florida’s Groundwater Plumbing
At 12:32 am Alaska time on January 23, 2018, a magnitude 7.9 earthquake shook Alaska residents out of their beds and set off fears of a tsunami all down the West Coast. Fortunately, the tsunami was only a few inches in height, but within an hour of the earthquake in Alaska, waves of a different sort were hitting far away in Florida.
How Well Do You Know Groundwater
Groundwater, which flows out of sight through aquifers beneath our feet, is one of the Nation’s most important natural resources. In recognition of National Groundwater Awareness Week, March 5–11, 2017, here’s an opportunity to put your knowledge of this vital resource to the test!
How Much Water Do We Use?
The USGS National Water-Use Science project has documented 60 years of water-use from 1950 to 2010 in an interactive map. Choose a year and pick a category to see how much water your state uses.
Helping Desert Communities Find Hidden Water
Desert communities throughout the Southwest are putting water availability at the top of their municipal agendas.
Large Precipitation Events are Critical in Replenishing Groundwater Resources
Large precipitation events that occur about every 10 years are a critical source of recharge for replenishing groundwater resources, according to a new study by the U.S. Geological Survey and the Bureau of Reclamation.
Measuring the groundwater level in a well near Lame Deer, Montana
Measuring the groundwater level in a well near Lame Deer, Montana
Measuring Total Well Depth Using a Steel Tape - YouTube
This video demonstrates how to measure total well depth below land surface using a weighted, graduated steel tape.
Piezometer used to record groundwater levels
Measuring Water Levels in a Flowing Well
This video demonstrates how to measure low pressure hydraulic head in a flowing well.
Measuring Groundwater with Electric Tape
This video demonstrates how to measure water levels in wells using an electric tape.
Measuring Groundwater with Steel Tape
This video demonstrates how to measure water levels in wells using a graduated steel tape.
Taking a water-level measurement in a monitoring well at Jackson Hole
Taking a water-level measurement in a monitoring well at Jackson Hole Airport.
Well, Well, Well! How Deep is the Water Table?
This month we highlight a new interactive map that allows users to determine the depth to groundwater at any location in the Portland Metropolitan Area, Oregon. This month's episode features an interview with the groundwater project's lead author, USGS hydrologist Daniel Snyder. Stick around and learn about the water beneath our feet here at the USGS Oregon Science Podcast
Using altitudes of the water table at individual wells on Long Island
Using known altitudes of the water table at individual wells (A), contour maps of the water-table surface can be drawn (B), and directions of ground-water flow along the water table can be determined (C) because flow usually is approximately perpendicular to the contours. Groundwater moves along flow paths of varying lengths in transmitting water from areas of recharge to
...